Britax GROW WITH YOU Guide D'utilisation page 16

BRITAX Child Safety, Inc.
Harness Mode: Lap Belt
Before you begin:
•
•
•
1� Pull seat cover forward�
2� Pull the vehicle belt out
3� Push the child seat firmly
14
12390000_USER GUIDE_GROW WITH YOU, CAN.indb 14 12390000_USER GUIDE_GROW WITH YOU, CAN.indb 14
Check that your vehicle has a top tether anchor�
The top tether must be used at all times when
installing the child seat� Using the top tether will
improve the stability of your child seat and reduce
the risk of injury� Check your vehicle owner's
manual for tether anchor locations�
Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during installation�
Adjust the child seat to desired position and place
forward facing on the vehicle seat�
and route along the
green belt path�
NOTE: Verify that the
strap is not twisted.
into the vehicle seat
while removing all slack
from the lap part�
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
NOTE: The child seat is secure when it cannot be
moved front-to-back or side-to-side more than 2.5 cm
(1 in.) at the belt path. If the child seat is not secure,
repeat the installation procedure or use a different
seating location.
2/12/2020 6:20:53 PM 2/12/2020 6:20:53 PM