Positioning Of The H-20 Spacer In The Inner Slide; Internal Slide - Videotec ULISSE MAXI NETCAM Manuel D'instructions

7.1.3.3 Positioning of the H-20 spacer in the
inner slide
Connect the camera and fasten the L-shaped bracket
(Fig. 8, page 15).
It is possible to fasten the H-20 spacer (02) to the
lens. Interpose a plastic spacer (01) of the required
thicknessand fix it by means of washer and screw
(03).
Fig. 12
Position the lens with the spacer on the inner slide
(01) and fasten the spacer by means of the washers
and screws (02) provided as standard.
Fig. 13
Finish the installation as shown in the relative images
(Fig. 10, page 15 and Fig. 11, page 15).
16
01
02
03
01
02

7.1.3.4 Internal slide

Shift the inner slide with lens and camera already
fastened into the wanted position and secure it by
means of the washers and screws provided.
Fig. 14
MNVCUPTMAXIR_1430_EN