Identification; Product Description And Type Designation; Product Markings; Checking The Markings - Videotec ULISSE MAXI NETCAM Manuel D'instructions

4 Identification

4.1 Product description and type
designation
ULISSE MAXI NETCAM is a powerful Full-IP PTZ for
outdoor IP video surveillance, which can manage
modern IP SD, HD and Megapixel cameras, with
integration in a network system.
This model can contain and manage the largest
motorised lenses on the market, with a total weight
of up to almost 8 kilos. This way a single unit can
provide a 360° coverage of the area to be monitored.
A special feature of ULISSE MAXI NETCAM is the
ability to easily control, via the network, all the
camera's pan & tilt functions, including wiper, preset
and set-up, using the most common VMS on the
market.
It is possible to use any ONVIF compatible Profile S
camera, or proprietary protocol on RS-485, whilst the
entire management of the system only requires an IP
address.
The unit is equipped with a wiper for removing
rain and dust from the front glass; there is a wide
selection of jerry cans with washer pump, different
capacities and heads.
To ensure detailed images even during the night
hours, versions are available with LED illuminators,
with infrared light or white light.
The sturdy mechanical structure and the powerful
motors of this PTZ are designed to guarantee
maximum resistance to high operating stress,
vibrations and temperatures between -10°C to +60°C.
ULISSE MAXI NETCAM is equipped with optical
encoders which ensure the accurate control of the
position in any condition of use.
Models are available for vision with a thermal camera.
10

4.2 Product markings

Pan & tilt devices have a label complying
with CE markings.
Fig. 1
The label shows:
• Model identification code (Extended 3/9 bar code).
• Power supply (Volt).
• Frequency (Hertz).
• Current consumption (Amps).
• Weatherproof standard (IP).
• Serial number.

4.2.1 Checking the markings

Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not shown in this handbook.
Improper use of the appliance can cause serious
hazards, risking the safety of personnel and of the
installation.
MNVCUPTMAXIR_1430_EN