Home; User Controls - Videotec ULISSE MAXI NETCAM Manuel D'instructions

9.1.2 Home

If you log in successfully, the Pan & Tilt management
interface will appear.
Fig. 63

9.1.3 User Controls

To control the Pan & Tilt through the browser, select
the User Control entry. A new window will open with
a virtual keyboard to enter commands.
Fig. 64
MNVCUPTMAXIR_1430_EN
The virtual keyboard contains the following controls:
• Speed selector: It selects the speed of the pan &
tilt movements.
Fig. 65
• Zoom wide/Zoom tele
Fig. 66
• Focus far/Focus near/Auto focus
Fig. 67
• Iris close/Iris open/Auto iris
Fig. 68
• Wiper/Washer
Fig. 69
• Day: Activate the camera's IR filter. If available, it
turns off the LED illuminators.
Fig. 70
• Night: Deactivate the camera's IR filter. If available,
it turns on the LED illuminators.
Fig. 71
35