Programming Coffee Measures (Only Carisma A Version) - Faema Carisma S-1 Manuel D'utilisation Et D'installation

6. Programming coffee measures (only Carisma A version)

How to access the programming function
To enter the programming mode, press button
pressed for a few seconds; the buzzer sounds intermittently.
To terminate this phase, once the 2 coffee dispensing keys
have been set ( ), press the
Programming coffee measures
"Before programming the coffee dispensing push
buttons fill the filter holder with the correct serving of
ground coffee. Don't use coffee grouts for programming
servings."
Fit and tighten the filter holder (15) on the coffee dispenser
unit, positioning the cup (or cups) under the nozzle (or nozzles)
of the filter holder (15).
Press the coffee dispensing push button (
corresponding to the required serving to be programmed.
When the amount of coffee in the cup reaches the required level,
press again the button (
Repeat the above operations for both coffee push buttons.
Note: if you make a programming mistake, use a new dose of
ground coffee and repeat the operation.
and keep it
key again.
or
or ) to stop dispensing.
)
37
15