Setting The Actuator End Limits - SOMFY HiPro-FTS 50 Notice D'installation

9. Setting the actuator end limits

• Maintaining the wiring set up in section
8.4, unwind the fabric to the desired end
limit.
• Press the strap winding push button on
the straps actuator to return it to normal
position.
"Straps"
actuator
yellow push
button
• Press the fabric motor push button which
is not for winding the fabric, to return it to
normal position.
"Fabric"
actuator
yellow push
button
• Maintaining the wiring set up in section
8.4, wind the fabric to the desired end
limit.
• Press the fabric winding push button on
the fabric actuator to return it to normal
position.
"Fabric"
actuator
yellow push
button
• Press the push button which is still in the setting position on the straps actuator.
"Straps"
actuator
yellow push
button
• Maintaining the wiring set up in section 8.4, perform an out & back movement to check
the end limits, then unplug the setting tool from the power supply before disconnecting
the actuators.
Never leave a push button engaged when the adjustment is carried out.
8
5034918A_FTS.indb 8
S " "
ETTING ThE STRApS END LImIT
S "
ETTING ThE fAbRIC
"Straps"
actuator
white push
button
"Fabric"
actuator
white push
button
"
END LImIT
"Fabric"
actuator
white push
button
"Straps"
actuator
white push
button
Copyright © 2013 - 2017 Somfy SAS. All rights reserved.
09/05/2017 15:08:30