Safety; Safety And Responsibility; Specific Safety Advice - SOMFY HiPro-FTS 50 Notice D'installation

2. Safety

2.1. Safety and responsibility

• This Somfy product must be installed by a professional motorisation and home automation
installer, for whom these instructions are intended.
• Before installation, check that this product is compatible with the associated equipment and
accessories.
• These instructions describe how to install, commission and use this product.
• Moreover, the installer must comply with current standards and legislation in the country in
which the product is being installed, and inform his customers of the operating and mainte-
nance conditions for the product.
• Any use outside the sphere of application specified by Somfy is not approved. Such use,
or any failure to comply with the instructions given herein will invalidate the warranty, and
Somfy refuses to accept liability.
Subject to technical modifications.

2.2. Specific safety advice

In addition to the safety instructions described in this guide, be sure to also observe the
instructions set out in the attached document "Safety instructions to follow and keep".
Switch off the mains supply of the shade before
1)
performing any service operation in the vicinity.
To avoid damaging the product:
Never immerse it in liquid!
2)
Avoid impacts!
3)
Do not drop it!
4)
Never drill holes in it!
5)
Avoid moving the shade if ice has formed on it.
6)
Always make a loop in the power supply cable to
7)
prevent water entering the motor!.
4
5034918A_FTS.indb 4
1 2
OFF
3 4
5 6
7
Copyright © 2013 - 2017 Somfy SAS. All rights reserved.
09/05/2017 15:08:18