Control Box Specifications - SOMFY HiPro-FTS 50 Notice D'installation

10. Control box specifications

• IP56 waterproof box: 190 x 145 x 80 mm.
• Equipped with 5 packing glands.
• Functions:
WARNING
• Individual one-touch control via
double push button. Compatible
with SOMFY Soliris IB automated
systems.
• Symmetrical dynamic tension
(the preset dynamic brake
will be applied to the straps
Contact will cause
actuator and the fabric actuator)
electric shock
or dissymmetrical dynamic
tension (the preset dynamic
brake will be applied to the straps
actuator or the fabric actuator,
depending on a dip switch
selection). (12)
• Fabric dynamic tension
adjustable via potentiometer. (13)
• Fabric end tension adjustable via
potentiometer. (14)
• Safety contact, e.g. for skylight,
between terminals 13 and 16.
• Thermal safety: actuator power
supply cut off in case of heat
detection on one of the actuators.
• Simultaneous brake release.
(11)
• 230V / Dry Contact switch (15)
• LED 1 (16)*
• LED 2 (17)*
• Delay on actuator outputs: 6
min.
• Selection for the power supply
frequency 50/60 Hz. (10)
*Default LED signification
LED 2 LED 1
Off Off
Off On
On Off
On On
Blink Blink
Copyright © 2013 - 2017 Somfy SAS. All rights reserved.
5034918A_FTS.indb 9
50112069
08
X01 - EH
Problem
None
Overheat because of strap motor (the one connected on J2)
or installation
Overheat because of fabric motor (the one connected on J3)
or installation
Overheat coming from the box itself
Temperature is higher than the lower threshold at startup
FUSE
J1 J2 J3
WARNING
Contact will cause
electric shock
50112069
08
X01 - EH
0
16
17
ON ON
15
OFF OFF
12
10
0
0
11
14
J6
J4 J5
13
09/05/2017 15:08:31
ON ON
OFF OFF
0
9