Actuator Specifications; Actuators Technical Data; Installation Configurations - SOMFY HiPro-FTS 50 Notice D'installation

3. Actuator specifications

• SOMFY HiPro-FTS 50 and FTS 60
actuators
• FTS 50: tube min. ∅ 50 mm
• FTS 60: tube min. ∅ 63 mm
Note: for the choice of actuators, refer to
the FTS charts.
• Quick setting of the end limits.
• 6 options for actuator head
orientation.
• Fitting tors, with electric brake
release (5 conductor wire).
• 1 m or 2.5 m RRF anti-UV black cable,
non removable, 5 x 0,75 mm

4. Actuators technical data

Power supply
Operating temperature
Protection rating

5. Installation configurations

There are various possible installation configurations according to:
- The actuator positioning (head on right or left).
- The winding direction of the fabric or strap. (Overwinding or underwinding).
These different configurations require specific setting of the end limits and appropriate connection.
Examples of configurations:
End limit: White push
button (W)
W
Winding: brown wire
End limit: Yellow push
button (Y)
W Y
Winding: black wire
Copyright © 2013 - 2017 Somfy SAS. All rights reserved.
5034918A_FTS.indb 5
.
2
230V-50Hz 220V-60Hz
- 20°C to + 70°C
IP 44
Y
Europe Comments
Blue Shared
Black Yellow push button
Brown White push button
Grey Brake
Y/G Earth
«Europe» actuators
FTS Torque Speed
Range Nm T/mn
LT 50 25 17
LT 60 55 17
LT 60 70 17
End limit
switch capacity
46 turns
35 turns
35 turns
5
09/05/2017 15:08:20