Adjusting The End Limits; Recording The Rts Transmitter; Favorite Position: My Position Recording My Position - SOMFY Sonesse 50 RTS Notice D'installation

5.3. Adjusting the end limits

The limits can be set in any sequence.
1) Press and hold the UP button to move the shade
to the desired Up position. If necessary adjust the Up
position, using the UP or DOWN buttons.
2) Press the MY and DOWN buttons simultaneously
and release them once the shade begins to move. The
up limit is memorized.
3) Press the MY button when it reaches the desired
Down position.
If necessary adjust the down position, using the UP or
DOWN buttons.
4) Press the MY and UP buttons simultaneously and
release them when the shade begins to move.
The Down limit is memorized. The shade moves up and
will stop at its upper limit.
5) To confirm the end limits press and hold the MY
button until the shade jogs.The end limits are recorded.

5.4. Recording the RTS transmitter

After recording the end limits:
Briefly press the programming button on the back of
the transmitter. The shade jogs.
The transmitter is recorded.
OR
1) Switch off the power supply.
2) Switch on the power supply. The shade jogs.
3) Simultaneously press the UP and DOWN buttons on
the RTS transmitter. The shade jogs.
4) Briefly press the programming button on the back of
the transmitter. The shade jogs.
The transmitter is recorded.
5.5. Favorite position: MY position / Recording MY position
To set the MY position, move the shade to the desired
position with the UP or DOWN button then press the
MY button until the shade jogs.
© 2013 Somfy SAS. All rights reserved. 12/2013
All manuals and user guides at all-guides.com
1 2
4
3
5
PROG.
1 2
3 4
PROG.
7