Quick Start; Quick Installation Guide; Order Code - Burkert 8223 Manuel Utilisateur

2.1 QUICK INSTALLATION GUIDE

* or the trans mis sion
of the temperature on
the 4-20 mA output.
See § 3.4
See § 4.3.1
Press the push-
button for 2 s
See § 3.6

QUICK START

Unpack the
ap pli ance

Order code

OK ?
Unscrew the 2 plugs
Select the measuring range
using SW1
Select the filtering level using SW1
Select the temperature com pen sa tion
using SW2 *
Select the type of current output
using SW3
Open the EN 175301-803 connector
Connect the power supply cable to
the EN 175301-803 connector
Re-mount the EN 175301-803 con-
nector and connect it to the sensor
Power the sensor
Green
No
LED flashes once briefly
every 2 s and current output
indicates 4 mA?
Install the appliance on the pipe
4
Verify that the delivered
product is complete.
See § 7.1
No
Contact your
Bürkert agent
Yes
Use a coin for instance
See the con fi gu ra tion
table opposite and
para graph 3.2.
See the con fi gu ra tion
table opposite and
paragraph 3.3
See the con fi gu ra tion
table opposite and
paragraph 3.4
See the con fi gu ra tion
table opposite and
paragraph 4.3.2
Yes
Ensure that the
cable is not
pow ered.
Drive home
the connector
screw.
The sensor
must be out of
the fluid.
See § 4.1
8223