Operating And Control Guide - Burkert 8175 Manuel Utilisateur

4.1 OPERATING AND CONTROL GUIDE

LCD display
Measured value
Selection of parameters
and digits.
Keys
0......9
ENTER
ENTER
+
pendant 5 s
ENTER
0......9
+ +
pendant 5 s
* Only available within the main menu.
ENTER
The Key can be locked to avoid accidental or unauthorised access.
For further information see section 3.3.
8175
OPERATION
Selection of parameters
and digits.
Menu Mode
Previous menu
Next menu
Activate te menu display (if "END" is displayed,
save the modified parameters and return to the
main menu
Access to the CALIBRATION* menu
Access to the TEST* menu
25
Unit selected
Selection and
confirmation
Indication of the state of
relays 1 and 2.
(LED on = closed contact)
Finding a value
Increase from the blinking digit
Advance to the next digit
Validate the displayed value