Simulation Of The Level Or Temperature - Burkert 8175 Manuel Utilisateur

4.5.5 Simulation of the level or temperature

A level or temperature can be simulated within this function which allows the control system
to be tested whatever the conditions of the tank or vessel. The simulated value influences
the current ouput including the relays.
The units and decimal points selected within the engineering units are valid within this
function.
SIMUL
Enter the temperature in
°C if chosen unit=cm or m and
°F if chosen unit=foot or inch
SIMUL
SIMUL
Press or to quit the Simulation sub-menu and let the output be automatically
0......9
determined by the transmitter according to the application.
8175
TEST MENU
ENTER
23.5 °C
0......9
30.2 °C
ENTER
00.00 M
0......9
08.05 M
ENTER
53
LEV / VOL
ENTER
T° SIMUL
Enter the level, distance or
volume value