Operating And Control Elements - Burkert 8225 Notice D'utilisation

4 OPERATION
The operation is divideded into 3 main menus
1 Display
Conductivity, temperature and output current are displayed within this menu, and the
"HOLD" function can also be obtained.
2 Parameter Definition
All the necessary adjustments, such as language, engineering units, cell constant,
temperature compensation factor, 4...20 mA measuring range, relay and filter are set
within this menu.
3 Testing
Conductivity can be simulated within this menu, allowing the user to test the process in the
"dry condition".
The non-compensated conductivity of the transmitter is also displayed within this menu.
The basic settings (Offset, Span) of the device can be changed within this menu.

4.1 Operating and Control Elements

Choice of digit value
Steps from 0 to 9
Direction downwards
in menu or sideways
for digit selection
125.6 m S
E-14-
CONDUCTIVITY 8225
Acceptance the chosen
parameter or adjusted
value
Relay 2: contact closed
Relay 1: contact closed
8225-COMP-**