Testing - Burkert 8175 Manuel Utilisateur

To access the TEST MENU simutaneously press for
2.3
See section 4.5.1
See section 4.5.2
See section 4.5.3
See section 4.5.4
See section 4.5.5
See section 4.5.6
8175
QUICKSTART

TESTING

Control of 4 mA
Control of 20 mA
Adjustment of the
temperature
Display of the
signal strength
Simulation of
the outputs
Resetting of the
stored parameters
The unit is now ready
9
ENTER
5 seconds.
0......9
The mode Offset fixes the output
current of 4mA. (optional)
The mode Span fixes the output of
20mA. (optional)
Verify the real temperature is near to
that of the measured temperature.
(optional)
Orient the transmitter to obtain the
highest signal strength.
This is optional although it is recom-
mended for commissioning large
systems.