Burkert 8175 Manuel Utilisateur page 80

Obstacles inside the tank
60
Rough-surface liquids or liquids which can foam
min. 30 cm
min. 80 mm
8175
INSTALLATION
The fixed obstacles inside the tank may genera-
te false echos.
Ensure there is no obstacle within the beam
cone.
If this is impossible, mask the obstacles by
means of deflectors or use a meter tube as for
the rough-surface liquids (see hereafter).
When the tank filling-up generates waves or
foam, extend the meter tube as far as under the
surface of the liquid.
A meter tube makes it also possible to have
stable measurements. It makes it possible to
ignore the obstacles inside the tank.
The meter tube cannot be used with
clogging products.
11