Burkert 8175 Manuel Utilisateur page 112

If an incorrect value is entered, select 'END YES' and validate the measurements entered. Wi-
thin the main menu (calibration) select 'END', then re-enter the menu and function and repeat
the input of the measurements starting at the incorrect value.
MANUAL
ENTER
D
Enter the first volume measurement
Enter the second volume measurement
CURRENT
ENTER
ENTER
CURRENT
N ≤ 12
Enter the n
This option enables to display volume in a percentage for example or in alternative units.
-
The units selected must then not be taken into account.
In the same way, the 8175 can be used to display the flow rate within open channels.
-
8175
CALIBRATION MENU
00.00 M
Enter the first distance measurement
0......9
00.65 M
ENTER
00.00 M
Enter the second distance measurement
0......9
00.65 M
ENTER
VALID Y
ENTER
VALID N
ENTER
00.00 M
Enter the n
0......9
02.05 M
ENTER
th
volume measurement
43
1=0000.0
0......9
1=0013.0
ENTER
2=0000.0
0......9
2=0035.2
ENTER
END YES
0......9
END NO
th
distance measurement
N=0000.0
0......9
N=0041.1
ENTER