Selecting The Operating Mode; Selecting The Process (Magicwave) - Fronius TransTig 2200 Instructions De Service

Selecting the
operating mode
1.
Selecting the 1.
process (Magic-
Wave)
Caution! Risk of injury and damage from electric shock. As soon as the mains
switch is in the "ON" position, the tungsten electrode of the welding torch is
LIVE. Make sure that the tungsten electrode does not touch any persons or
electrically conducting or earthed parts (e.g. housing, etc.)
Switch the mains switch "ON" - all the indicators on the control panel will briefly light
up
(2)
(3)
(1)
Press the "Process" button (5) to select:
AC welding process or
AC welding process with activated cap-shaping function or
DC welding process
2. Press the "Mode" button (1) to select
either:
- 2-step mode (2) or
- 4-step mode (3)
Note! Do not use pure tungsten
electrodes (colour-coded green)
on TransTig power sources.
26