Adjusting the position of the gear change and
rear brake pedals (fig. 25)
Notes
You can change the position of the gear change and
rear brake pedals using the upper fixing holes (A and B)
in combination with the lower ones (C, D, E, F and G)
E
to which the footpeg brackets are attached. The figure
shows footpeg adjustment for the gear change pedal only.
The rear brake footpeg is adjusted in the same way.
Warning
In view of the importance of these components for
safety while riding the motorcycle, we advise you to
contact an authorized DUCATI workshop to have them
adjusted.
32
https://www.motorcycle-manual.com/
A
B
C
D
fig. 25