Adjusting The Gear Change And Rear Brake Pegs - Ducati 999R Manuel D'utilisation Et D'entretien

Adjusting the gear change and rear brake pegs

Note
The position of the gear change and rear brake pedals
may be changed by using different combinations of the
upper (A and B) and lower (C, D, E, F and G) mounting
holes to secure the footpeg brackets. The figure shows
gear change footpeg adjustment. The rear brake footpeg is
adjusted by the same procedure.
Warning
Gear change and rear brake footpegs are critical
safety components. Have them adjusted at an Authorized
DUCATI Workshop.
A
B
C
D
fig. 25
E
31