Agilent Technologies Turbo-V 3K-G 969-8888 Notice De Mode D'emploi page 341

If during installation the program finds some system files that are out of date,
NOTE
you will be prompted to restart the computer. In this case proceed to restart the
computer and repeat the installation procedure.
Operating Procedure
Proceed as follows to correctly use the controller:


Download Software
The File Download program acquires the file from the MoniTorrs
connected in the network and stores them on hard disk. This is
automatically performed by the program when it is launched, or at
regular intervals depending on the parameters set.
Functionality
As soon as it is activated, file download establishes a connection with
the MoniTorrs on the net-work and updates the data that are present
on the panel displayed on the personal computer monitor.
As soon as it is activated it starts to scan the network and it
continuously downloads the file when it is ready.
The program is configured to work with the COM 1 serial port. If a
change is required, click the right mouse button with the cursor on
the Agilent logo on the right-hand side of the windows bar.
Turbo-V 3K-G Pumping System User Manual / 87-901-011-01
Power on the system. The related LED on the front panel will
come on.
The MoniTorr detects when the pump's maximum rotation speed
is reached. At this point the acquisition and analysis of the data
deriving from the pump begins and is signalled by the flashing of
the Data Acquisition LED (yellow).
Technical Information
MoniTorr
(C)
17
341/374