Fuel Tank Cap - Sym ME20BW-COC Série Manuel D'utilisation

 Engine Stop Switch
Switch to this position to turn off the engine when a state of emergency.
Switch to this position and the engine can be started.
 Electrical Starter Button
This is a starting motor button (switch) for engine starting.
With the main switch "ON",press this button slightly to start the engine.
CAUTION:
 Release this button immediately after engine has been started, and never press the button
again to avoid damaging the engine.
 This mechanism is a safety design. The engine can only be started except squeezing the clutch
lever or the gear must be at neutral.
 High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
 Horn Switch
Press this button down when ignition switch is in the "ON" position, the horn will sound.
CAUTION:
Do not press this button when you are in "No Horn" area.
 Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to the "ON" position, and slide the turn signal switch to left or right. Then, the turn
signal lights will flash.
To release, simply return the turn signal light button to the original position.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
§FUEL TANK CAP §
1. Insert ignition switch key into the lock on the fuel tank cap, and turn the key clockwise, so the
cap can be removed.
2. Do not fill above the fuel upper limit when refueling.
3. Align the "△" mark on the cap with the front, turn the key of the fuel tank counter-clockwise to
lock the fuel cap. To remove the ignition key after lock the fuel tank cap.
11