Drive Chain - Sym ME20BW-COC Série Manuel D'utilisation

§DRIVE CHAIN §
The drive chain will be elongated and slackened as the
using time passed. So it is necessary to be inspected
and adjusted periodically.
<Drive Chain Inspection>
 The drive chain check lie under drive chain center,
the slack of the chain should be 10~20mm.
 Stand the motorcycle with main stand upright.
Turning the rear wheel, check the drive chain for
free operation and noise.
 Adjust the drive chain if there is any abnormality.
<Drive Chain Adjustment>
1.
Loose the rear wheel axle nut.
2.
Turn the adjusting nut for adjustment. Tighten the
axle nut after adjusted.
3.
Check the rear brake pedal free play and adjust if
necessary.
CAUTION:
 The right and left adjuster must be adjusted
to the same scale.
 Clean and lubricate the drive chain
frequently.
Axle nut
22
Adjuster
Scale