Operation Of Ignition Switch; Operation Of Steering Handle Lock Switch; Operation Of Fuel Tank Cap Switch - Sym FS05W1-EU Série Manuel D'utilisation

§OPERATION OF IGNITION SWITCH §
IGNITION SWITCH
"ON" position:
 Engine can be started in this position.
 Ignition switch key can not be removed.
"OFF" position:
 Engine is shut off and can not be started in this position .
 Ignition switch key can be removed.
§OPERATION OF STEERING HANDLE LOCK SWITCH §
"Steering handle lock" position
 Turn the steering handle to left and insert the key into, press
ignition switch key clockwise and then lightly turn it to left to the
"lock" position.
 The steering handle is locked in this position.
 Ignition switch key can be removed.
 When unlocking, simply turn the key from the "LOCK" position to
the "OFF" position.
§OPERATION OF FUEL TANK CAP SWITCH§
"Fuel tank cap open" position：
 How to open：Insert your key into the ignition switch, and turn it to the right.
 How to lock：Push the fuel tank cap and it locks automatically
§OPERATION OF IGNITION§
"OPEN" position:
 The keyhole baffle can be moved to open by turning the "open "after contact and
pointing at the magnet switch keyhole
"SHUT" position:
Directly press the black button next to the "shut "button and the keyhole shutter can be closed by
automatically popping the keyhole baffle.
MAGNETITE KEY：
 Insert your magnetite key into the magnetite keyhole, and turn it to right ignition keyhole block
board can be to open.
 When close ignition keyhole. You just push the Ignition keyhole block board push rod, and ignition
keyhole can be to close.
Magnetite key keyhole
8
Magnetite key
CAUTION:

Make sure to take the
key away with you
before you lock your
seat.