System Update; Auto Reboot - Comelit PPTZ120IRE Manuel Utilisateur

System Update

Network High Speed Dome "System Update" setting interface as shown in the figure below.

File: click Browse to find and select the upgrade kit, then click Update.

NOTE: to upgrade must first be uploaded the file whose name starts with (Main fw), then the one whose name starts (Sub
fw). After the upgrade is mandatory to restore the camera to the factory configuration (default). Before reconnecting the
camera, clear the IE cache memory and the old ActiveX.
Non-technical personnel should not try to run the system upgrade; do not turn off the power during the upgrade
process.

Auto Reboot

Network High Speed Dome "Auto Reboot" setting interface as shown in the figure below.
Rev. A
Figure 3-41
Figure 3-42