Hardware Installation; System Requirement; Installation Environment; Installation Environment Requirements - Comelit IPPTZ120IRD Manuel Utilisateur

2. Hardware Installation

System requirement


LAN or WAN Internet to connect server, via PC Ethernet (network card or network cable) TCP/IP protocol connect , suggest
Internet Explorer 8.0 version or later.

Monitor and PC configuration:
CPU: Dicaryon 2.8G or later, RAM: 512M or later (Above DirectX 8.1)

Monitor: 17", 1920×1080 resolution

Operation system: Windows NT, Windows2000, Windows XP, Windows 7 or later

Installation environment

Installation environment requirements

Far away from humid or high-temperature environment; choose proper place for ventilation; avoid installing on shaky place and try to
stay away from heat device.

Recommend operating environment

-20°C～60°C

Hardware installation steps

Please make sure LAN and WAN are working in order before installation of the Network High Speed Dome. After checked all the
network system in good condition, keep your hands clean and dry, following the steps below.

Unpack the box to check the goods

Take out all goods which needed for installation from the box

Take off the protection cover and insert the SD card. Please refer to the SD card installation steps below.
2
Remove the ornament
screws (2pcs), then take it off
Loosen the screws
horizontal installation panel
(4pcs), then put up the panel
for a little
of