Dynamic Ip; Internet - Comelit PPTZ120IRE Manuel Utilisateur

Setting procedure:
1. Log in to the Network High Speed Dome via the IE browser (the default IP is 192.168.1.188).
2. Switch to the "Network Setting" interface; fill in the device IP address for the network administrator as distributed in the IP
address (e.g.192.168.1.50).
3. Fill in the subnet mask details; the default is 255.255.255.0.
4. Fill in the gateway address; the default is 192.168.1.1.
After entering all parameters, click "Save", then the device will restart. Enter the device IP address at the IE browser to view the camera.

Dynamic IP

Dynamic IP means that the Network High Speed Dome obtains an IP address from the DHCP server. See below picture for the network
topology:
Please refer to the below picture for the network settings:
Log in to the Network High Speed Dome via IE browser. Then turn to the "Network Settings" interface and click "DHCP".
After setting all the parameters, click save and restart to make the parameters valid.

Internet

There are three ways to connect the Network High Speed Dome to the Internet.
1. Fixed IP mode.
2. ADSL broadband and router share online mode (dynamic obtainment of IP address mode)..
3. PPPOE dial-up access..
After the Network High Speed Dome is connected to the Internet, remote Internet users can view it directly via domain name or IP address.
Rev. A