Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Live view

Note: the inserted Micro-SD card is for full-function display interface; otherwise, it is for a simple type interface.
Live preview interface as shown in the figure below:
In the Live view interface, users can execute procedures such as voice intercom, listen, capture, full-screen preview, video record, PTZ
and lens control, brightness and contrast adjustment, preset setting, cruise, track setting, linear scan, idle op., IR light, Privacy Mask, 3D
Position, etc.
Voice intercom: connect the sound pick-up device to the audio input port and the active loudspeaker to the audio output port, then
click the talkback icon. Turn on the voice intercom switch and the icon shows as
Speed Dome can be performed. Audio input setting as default mode.
Capture: click the
directory. The default path is C:\Program Files\PREVIEW, although the storage path can be changed.
Full Screen: press the
exit full screen.
Record: ON/OFF selectable. When ON is selected, the icon turns blue as in
which are saved in the appointed files in AVI format.
Zoom-in: use the mouse to perform local zoom for the video display area by scrolling the mouse wheel.
PTZ control: up/down/left/right/auto/adjust PTZ rotate speed, etc. as shown in figure 3-8 below.
Lens control: carry out scaling, focus, iris procedures, as shown in figure 3-8 below.
Brightness: the brightness of graphics can be adjusted, but only the brightness of the current previewed graphics displayed can be
changed and the setting will not be effective in the video, as shown in figure 3-9.
Contrast: the contrast ratio of graphics can be adjusted, but only the contrast ratio of the current previewed graphics displayed can
be changed and the setting will not be effective in the video, as shown as in figure 3-9.
Cyclotron arrow: restore the default brightness and contrast parameters, as shown in figure 3-9 below.
PTZ setting: preset setting, cruise, track setting, linear scan, idle op., IR light, Privacy Mask and 3D Position, as shown in figure 3-
10 below.
Rev. A
button, capture the current image and automatically save it in .JPG format to the snapshot storage
button or click the right mouse button to live preview in full screen; press the Esc key or remove clip to
Figure 3-7
; talkback between PC and Network High
, and the device carries out video recordings

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ipptz130irc

Table des Matières