Comelit PPTZ120IRE Manuel Utilisateur page 51

DDNS setting procedure：
1. Log in to the DDNS server (e.g. ; register accounts and password.
2. Click DDNS (can be selected when server provider is blank).
3. Select DDNS server provider, such as no-ip.
4. Enter DDNS login username.
5. Enter DDNS registered password.
6. Enter the domain name applied for the DDNS server, such as video.no-ip.net.
7. Enter the DDNS address, such as dynupdate.no-ip.com.
8. Enter the DDNS port, default is 80 (recommended that users keep it).
After all parameter settings have been completed, click "Save" and the device comes into effect.
Port mapping setting procedure
Example: TP-LINK TL-WR340G illustration.
1. Ask the network administrator for the IP address of the router (i.e. LAN gateway address), log in with your username and password,
then log in to the router. The main interface is as follows:
Open "Forwarding" and select "Virtual Servers" as the below picture shows:
2.
Rev. A