Gorenje BM 910 WII Mode D'emploi page 56

Loaf
Touch this button to select the size of the bread. Please note the total operation time may vary with the
different loaf size.
Delay (time)
If you want the appliance do not start working immediately you can use this button to set the delay
time.
You must decide how long it will be before your bread is ready by pressing the TIME. Please note the
delay time should include the baking time of program. That is, at the completion of delay time, there is
hot bread can be serviced. At first the program and degree of browning must be selected, then
pressing TIME to increase the delay time at the increment of 10 minutes. The maximum delay is 13
hours.
Example: Now it is 8:30p.m,if you would like your bread to be ready in the next morning at 7 o'clock,
i.e. in 10 hours and 30 minutes. Select your menu, color, loaf size then press the TIME to add the time
until 10:30 appears on the LCD. Then press the STOP/START button to activate this delay program.
You can see the dot flashed and LCD will count down to show the remaining time. You will get fresh
bread at 7:00 in the morning, If You don't want to take out the bread immediately, the keeping warm
time of 1 hour starts.
Note: For time delayed baking, do not use any easily perishable ingredients such as eggs, fresh milk,
fruits, onions, etc.
KEEP WARM
Bread can be automatically kept warm for 1 hour after baking. During keeping warm, if you would like
to take the bread out, switch the program off by touching the START/STOP button.
MEMORY
If the power supply has been interrupted during the course of making bread, the process of making
bread will be continued automatically within 10 minutes, even without touching "START/STOP" button.
If the interruption time exceeds 10 minutes, the memory cannot be kept, you must discard the
ingredients in the bread pan and add the ingredients into bread pan again, and the bread maker must
be restarted. But if the dough has not entered the rising phase when the power supply breaks off, you
can touch the "START/STOP" directly to continue the program from the beginning.
ENVIRONMENT
The machine may work well in a wide range of temperature, but there may be any difference in loaf
size between a very warm room and a very cold room. We suggest that the room temperature should
be within the temperature of 15 ºC to 34 ºC.
WARNING DISPLAY:
If the display shows "HHH" after you have pressed START/STOP button, the temperature inside
1.
is still too high. Then the program has to be stopped. Open the lid and let the machine cool down
for 10 to 20 minutes.
If the display shows"LLL"after pressing the START/STOP button ( except the programs BAKE), it
2.
means the temperature inside is too low （accompanied by 5 beep sounds）, stop sound by
pressing the START/STOP button, open the lid and let the machine rest for 10 to 20 minutes to
return to room temperature.
If the display shows "E E0" or "E E1"after you have touched START/STOP button, the
3.
temperature sensor is malfunction please check the sensor carefully by Authorized expert.
56