How To Connect The Outputs Of The Controller; P2 - Serial - Agilent Technologies TV 1001 SEM Notice De Mode D'emploi

17 Technical Information
How to Connect the Open-Collector Inputs of the Controller

How to Connect the Outputs of the Controller

The following figure shows a typical logic output connection (relay coil) but
any other device may be connected e.g. a LED, a computer, etc., and the
related simplified circuit of the controller. The figure
example refers to the programmable set point signal on pins 11 and 9.
Figure 25
P2 – Serial
Figure 26
260/296
Typical output connection
9 pin connector
TV 1001 SEM User Manual / 87-900-973-01 (H)