Tv 1001 Sem Switching Off; Emergency Stop - Agilent Technologies TV 1001 SEM Notice De Mode D'emploi

16 Instructions for Use
Use

TV 1001 SEM Switching off

To switch off the TV 1001 SEM it is necessary to remove the mains.
The integrated controller immediately stops the pump.
WARNING! The Turbo-V controller must be powered with 3-wire power cord (see
orderable parts table) and plug (internationally approved) for user's safety.
Use this power cord and plug in conjunction with a properly grounded power
socket to avoid electrical shock and to satisfy CE requirements. High voltage
developed in the controller can cause severe injury or death. Before servicing
the unit, disconnect the input power cable..

Emergency Stop

To immediately stop the TV 1001 SEM in an emergency condition it is
necessary to remove the supply cable from the mains plug.
236/296 TV 1001 SEM User Manual / 87-900-973-01 (H)