Agilent Technologies TV 1001 SEM Notice De Mode D'emploi page 233

16
Instructions for Use
Pump fixing
The TV 1001 SEM cannot be fixed by means of its base.
NOTE
The TV 1001 SEM belongs to the second installation (or overvoltage) category as
CAUTION!
per directive EN 61010-1. Connect the device to a mains line that satisfy the
above category. The TV 1001 SEM has Input/Output and serial communication
connectors that must be connected to external circuits in such a way that no
electrical part is accessible. Be sure that the insulation of the device connected
to the TV 1001 SEM is adequate even in the case of single fault as per directive
EN 61010-1.
TV 1001 SEM User Manual / 87-900-973-01 (H) 233/296