How To Connect The Open-Collector Inputs Of The Controller - Agilent Technologies TV 551/701 Navigator Notice De Mode D'emploi

17 Technical Information

How to Connect the Open-Collector Inputs of the Controller

Figure 24

How to Connect the Open-Collector Inputs of the Controller

Here below there are the typical connections of the open collector input of the
integrated controller to an external system. Two cases are considered:
1. the customer supplies the 24 Vdc
2. the customer does not supply the 24 Vdc
Please note that on the connector a 24 Vdc, 60 mA voltage, a GROUND signal
and the open collector pin are available.
282/328 TV 551/701 Navigator User Manual / 87-900-934-01 (P)