LERICA C254 Mode D'emploi page 99

Rev. 03 - 07/2015 - Cod. 1501151 - Instruction manual for vacuum chamber packaging machines Mod. C254-C308-C312-C412-C420
3) Position the container.
Choose a container that is suited to the size of the vacuum
chamber. If necessary you can remove the sealing bar.
Make sure the air suction device on the container is open.
4) Turn the machine on using the main switch
5) Cycle start-up.
Lower the lid using both hands by pressing both corners of the lid.
The cycle starts automatically.
6) Interrupting a cycle.
Interrupt the cycle at the desired vacuum level, which can be detected by the vacuum gauge, by pressing
the StOP key.
7) End of cycle.
The lid is opened automatically. Remove the container.
10 . Press the PUmP key.
10
99