Cleaning And Disinfecting The Machine; Cleaning External Surfaces: Plexiglass Bodywork And Lid; Control Panel; Cleaning The Vacuum Chamber - LERICA C254 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Rev. 03 - 07/2015 - Cod. 1501151 - Instruction manual for vacuum chamber packaging machines Mod. C254-C308-C312-C412-C420
9.3 CLEaNING aNd dISINFECTING ThE MaChINE
daNGER!
do not use solvents, thinners or other products classified as toxic, to clean the surfaces.
daNGER!
ventilate the environment if alcohol-based or flammable disinfectants are used.
aTTENTION!
do not scrape the surfaces with pointed or abrasive objects.
9.3.1 CLEaNING EXTERNaL SURFaCES: PLEXIGLaSS bOdyWORK aNd LId
• The stainless steel external surfaces and the Plexiglass lid must be cleaned with a soft cloth or sponge and
neutral detergent, following the direction of the satin finish.
• Rinse with a cloth dampened with drinking water.
• It is recommended not to use steel wool, scrapers or abrasive, acidic or aggressive substances, which could
irreparably damage the steel surfaces.
• After cleaning, it is recommended to protect the external surfaces with specific oil-based products for stainless
steel.
aTTENTION!
do not remove the serial number plates during cleaning.
These provide important information regarding the appliance for any technical support.
aTTENTION!
do not use water jets or vapour to rinse or clean the machine; avoid using water jets and
vapour near the appliance.
do not spray water on the tank intake slot.
9.3.2 CONTROL PaNEL
• It is recommend to use a soft cloth with little detergent and to dry it thoroughly.
• Do not use solvents or alcohol.
9.3.3 CLEaNING ThE vaCUUM ChaMbER
Clean the vacuum chamber and lid with a soft cloth dampened with drinking water.
It is recommended not to use aggressive detergents, steel wool, scrapers or abrasive, acidic or aggressive sub-
stances, which could irreparably damage the internal surfaces of the vacuum chamber.
Once cleaned, rinse thoroughly with drinking water.
9.3.4 CLEaNING ThE SEaLING baR
• Clean the sealing bar and lid with a soft cloth dampened with drinking water.
• Do not use scrapers or other sharp tools to remove any residue.
108

Publicité

Table des Matières
loading

Produits Connexes pour LERICA C254

Ce manuel est également adapté pour:

C308C310C312C412C420

Table des Matières