Replacement Of Complete Sealing Bar - LERICA C254 Mode D'emploi

Rev. 03 - 07/2015 - Cod. 1501151 - Instruction manual for vacuum chamber packaging machines Mod. C254-C308-C312-C412-C420
aTTENTION!
• do not replace the Teflon when the bar is still hot because you could burn yourself.
• always unplug the appliance before carrying out any maintenance.
11.1 REPLaCEMENT OF COMPLETE SEaLING baR
• Extract the sealing bar from the vacuum chamber by lifting it horizontally from the sides (Fig. 1).
• Thoroughly clean the contacts
• Place the new one, making sure it engages correctly with the electrical contacts
114
11. MaINTENaNCE
and the two holes for the pins on the sealing bar
a
Fig. 1
b
.
b
a .
a
b