Scheduled Routine Maintenance - LERICA C254 Mode D'emploi

Rev. 03 - 07/2015 - Cod. 1501151 - Instruction manual for vacuum chamber packaging machines Mod. C254-C308-C312-C412-C420
9.2 SChEdULEd ROUTINE MaINTENaNCE
FREQUENCy
before each start-up
Weekly
Every 3000 work cycles Appliances with 4 m
Every 5000 work cycles Appliances with 8 m
Every 5000 work cycles Appliances with
Every 7500 work cycles Appliances with
Every other oil change. Pump.
Every 6 months and
after having been idle
for a long time.
maChINE
PaRt
Pump.
Power cable.
plexiglass lid.
Silicone counterpart
bar and Plexiglass lid
gasket.
Machine and Vacuum
chamber.
Sealing bar connec-
tion.
Sealing bar
Pump.
M a c h i n e , v a c u u m
chamber, lid and pa-
nels.
/h.
3
/h.
3
12 m /h.
3
20 m /h.
3
Pump.
INtERvENtION
Check the level and
colour of the oil; top-up
or replace, if the colour
is too dark or whitish
(contact a specialised
after-sales centre).
Verify its integrity; re-
place if defective
Verify its integrity; if
there are any cracks
or streaks, contact the
after-sales centre to
replace the lid.
Check that they are
inserted well into the
respective seats; re-
place if defective or
worn.
Clean impurities, oil
and grease.
Check that it is inser-
ted well on to the two
contact pins.
Clean the upper part
with a damp cloth.
Clean the two contact
pins.
Run the pump oil dehu-
midification cycle
Disinfect.
Replace the pump oil.
Replace the oil filter.
Replace the pump oil.
OPERatIONS PERFORmEd
by OWNER
by hELP CENTRE
Check. Top up
or
replacement.
Check. replacement.
Check. replacement.
×
×
×
×
×
×
×
×
×
107