Switching Over Units - Seca mBCA 555 Mode D'emploi

Switching over units

120 • seca mBCA 555/554seca mBCA 552
4. Adjust the brightness:
► Press the plus/minus keys
► Press the stages in the selection bar
The setting is active.
5. To exit the menu, press the
Device mode
Basic
Advanced
Expert
Service
1. Press the key.
The Settings menu is displayed.
2. Press the or
3. In the Display menu, select the Units item.
4. Press the desired system of units.
The setting is active.
Measuring results are displayed in the selected system of units.
5. To exit the menu, press the
key.
Function available
key until the Display menu item is displayed.
key.
–
–
•
•