Activating/Deactivating Beeps - Seca mBCA 555 Mode D'emploi

Activating/deactivating beeps

126 • seca mBCA 555/554seca mBCA 552
3. In the Voice guidance menu, select the Volume item.
4. Adjust the volume:
► Press the plus/minus keys
► Press the stages in the selection bar
The setting is active.
5. To exit the menu, press the
Device mode
Basic
Advanced
Expert
Service
Beeps can be activated for measuring height in order to indicate the begin-
ning and end of a measurement procedure.
1. Press the key.
The Settings (Einstellungen) menu is displayed.
2. Press the or
displayed.
3. In the Voice guidance menu, select the Beeps item.
4. Select the desired setting for the Beeps item:
– Function activated
– Function deactivated
5. To exit the menu, press the
key.
Function available
key until the Voice guidance menu item is
key.
–
–
•
•