Transmitting Measured Results To Wireless Receivers; Switching Over Weighing Range Automatically; Switching Off The Scale - Seca 757 Mode D'emploi Et Garantie

Transmitting measured
results to wireless
receivers
Switching over
weighing range
automatically

Switching off the scale

62 •
If the scale is integrated in a
work, you can transmit the measured results to
receive-ready equipment (wireless printer, PC with USB
wireless adapter) at the touch of a button.
►
Press the (send/print) Enter key.
send
print
– Press key briefly: send measured results to all
receive-ready devices
– Hold down: print out measured result on
wireless printer
The scale has two weighing ranges. Weighing range 1
( ) provides a more precise weight indication with a
reduced load-bearing capacity. Weighing range 2 (
allows you to take advantage of the maximum load-
bearing capacity of the scale.
When the scale is switched on, weighing range 1 is
activated. If a specific weight value is exceeded, the
scale automatically switches to weighing range 2.
To switch back to weighing range 1, proceed as
follows.
►
Remove all loads on the scale.
Weighing range 1 is active again.
►
Press the Start key.
NOTE
The scale switches off automatically after a brief
time if no load is placed on it for a certain
period.
seca 360° wireless
net-
)