Basic Functions; Changing The Device Mode; Calling Up/Exiting A Menu - Seca mBCA 555 Mode D'emploi

7.1 Basic functions

Changing the device mode

Mode
• Measurement functions:
- Performing a measurement
Basic
- Reading off results
• No menu access
• Measurement functions:
- Performing a measurement
- Reading off results
Advanced
- Using additional functions
• Menu:
- Limited device configuration
• Measurement functions:
- Performing a measurement
- Reading off results
Expert - Using additional functions
• Menu:
- Device configuration
- Network configuration
• Measurement functions:
- Performing a measurement
- Reading off results
- Using additional functions
Service
• Menu:
- Device configuration
- Network configuration
- Additional service functions

Calling up/exiting a menu

112 • seca mBCA 555/554seca mBCA 552
The following device modes are available for setting the device up for different
usage situations:
Functions
To select a device mode, proceed as follows:
1. Press and hold the
menu appears.
The current device mode is displayed.
2. Press the desired device mode.
The function is active.
3. Press the
The main screen is displayed.
To call up the menu, proceed as follows:
1. Press the
The Settings menu is displayed.
2. To exit the menu, press the
The main screen is displayed.
NOTE
No menu access is possible in the Basic device mode.
Use Recommended user group
Guided
measurements
Guided
measurements
• Guided
measurements
• Configuring the
device
• Network connection
Service
key (approx. 5 sec.) until the Device mode
key in the header.
key.
key.
Hospital personnel
Hospital personnel
• Hospital personnel
• Hospital technicians
• IT administrators
Authorized service
technicians