Measuring Bioimpedance; Network Functions; Compatibility; Patient Target Group - Seca mBCA 555 Mode D'emploi

Measuring bioimpedance

Network functions

2.4 Patient target group

2.5 User qualification

Administration/network operation

Measuring mode

80 • seca mBCA 555/554seca mBCA 552
The bioimpedance measurement is carried out with the 8-point method. A
low alternating current is introduced via the foot electrodes of the scale
(
seca mBCA 555/554
standing aid (
measured. A bioimpedance measurement can only be started when the
weight and height of the patient have been determined on the device.
No bioimpedance measuring results can be shown on the multifunctional dis-
play of the device. The
bioimpedance measurement.
The device can be integrated into a PC network via a LAN interface or via
WiFi. The
The
seca connect 103
and forwards them to an EMR System or to the
The seca analytics 125
seca connect 103
therefore assists the physician supervising treatment in evaluating measuring
results or making a diagnosis.

Compatibility

Configuration software:
downward compatibility.
Evaluation software:
The weighing function is intended for persons of any age, with the exception
of babies. The bioimpedance measurement is intended for persons over 18
years of age. Limitations in terms of weight and height can arise depending
on the compatible seca products used:
➔
Technical data, page 139
➔
Compatible seca products, page 145

Assembly

Devices that are shipped partially assembled may only be mounted by suffi-
ciently qualified persons such as specialist dealers, hospital technicians or
seca Service technicians.
The device may only be set up and incorporated in a network by experienced
administrators or hospital technicians.
The device may only be operated by persons with formal training in the field of
healthcare or medicine.
,
seca mBCA 552
,
seca mBCA 550 seca mBCA 549
seca analytics 125
is required to set up this integration.
seca connect 103
software receives measurement data from the device
software receives measurement data from the
software and processes them graphically. The software
seca connect 103
seca analytics 125
) and the hand electrodes of the BIA
) and the bioimpedance is
software is required to analyze a
seca analytics 125
: Version 2.0 or higher, no
: Version 1.0 or higher.
software.