Switch Over Length Units (Unit) - Seca 285 Mode D'emploi Et Garantie

Switch over length units
110 •
You can select the units (Unit) you wish to use for
displaying the height.
(Unit)
NOTE
• This function is not available with all model
• Note and follow the national regulations
• Heights are transmitted to the control and are
1. Select the item "Unit" from the menu.
2. Confirm the selection.
The current setting is displayed.
3. Select the unit you wish to use for displaying length:
– Centimetre (cm)
– Feet and inches (ft:in)
4. Confirm the selection.
You will leave the menu automatically.
variants.
regarding units of measurement.
displayed in the units set here.