Deleting A Sample - Roland SP-404SX Mode D'emploi

Deleting a Sample

If you are not satisfied with the sound you sampled, use the following procedure to delete it, and then sample the sound again.
1. Press the [DEL] button .
2. The display will indicate "
3. Press the pad that you want to delete .
4. Press the [DEL] button to delete the sample .
NOTE
Never turn off the power before the deletion is complete. When the deletion is complete, the "
display will disappear.
," and the pads that can be deleted will blink .
dE L
Select a bank. Protected banks (p. 38) are indicated as
P r t
" " and cannot be selected.
Pads that can be deleted will blink.
The selected pad will change from blinking to lit.
You can select multiple pads.
d AL
" indication in the
21