Panel Descriptions - Roland SP-404SX Mode D'emploi

Masquer les pouces Voir aussi pour SP-404SX:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 108

Panel Descriptions

1
2
3
4
5
6
7
8
Name
1
[VOLUME] knob
2
[CTRL 1]–[CTRL 3] knobs
3
PEAK indicator
4
Effect buttons
Display
5
Display illumination
[PATTERN SELECT] button
6
[LENGTH] button
[QUANTIZE] button
[DEL] button
[REC] button
[RESAMPLE] button
[CANCEL] button
7
[REMAIN] button
[MARK] button
4
Description
This adjusts the volume.
These knobs control effect parameters.
You can also use each knob to make the following settings.
The starting location of a sample
CTRL 1
The playback time of a sample
The BPM (tempo) of the pattern
CTRL 2
The ending location of a sample
The type of MFX
CTRL 3/MFX
The sampling level
The volume of the sample
Indicates the analog input level of the LINE IN jacks.
Adjust the volume of your connected equipment so that this indicator lights occasionally.
Use these buttons to select the effect you want to use.
This shows information such as the BPM (tempo), the values of various settings, and error
messages (p. 45).
This will blink in synchronization with the pattern's tempo.
During sampling, this will light red if the level of the audio signal is excessive.
Press this when you want to play or record a pattern.
Specifies the length of the pattern when recording a pattern.
Specifies quantization (automatic timing correction) when recording a pattern.
Deletes a sample or pattern.
Starts/stops sampling or pattern recording.
Applies an effect to the sound of a sample and resamples the result.
Cancels an operation such as sampling, pattern playback, or recording.
By pressing this button four times in rapid succession, you can stop all sounds that are
currently playing.
Makes the display indicate the remaining time available for sampling.
In addition, you can hold down this button and press a pad to specify the sample to which
you want to apply an effect, or to specify the sample whose settings you want to edit (modify
current pad).
Use this button when you want to play only a portion of a sampled sound.
9
10
11
12
13
14
15
Page
p . 9
p . 13
p . 29
p . 30
p . 15
p . 28
p . 13
p . 19
p . 27
p . 19
p . 13
p . 40
p . 19
p . 14
p . 32
p . 32
p . 21
p . 18
p . 26
p . 12
p . 25
p . 13
p . 27

Publicité

Table des Matières
loading

Table des Matières