Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

UR-80 Editor

MIDI Port settings

In order to transfer memory sets between the UR-80 and UR-80 Editor, or to make system settings,
you must specify the MIDI port that UR-80 Editor is to use.
Here's how to make settings when you have connected the UR-80 to your computer via USB. If you
are using the MIDI connectors to make connections, specify the input/output ports of the
connected MIDI device.
Windows users
1.
From the Options menu, choose MIDI Devices.
2.
In the MIDI Devices dialog box that appears, make the following settings.
3.
Click [OK] to close the dialog box.
Macintosh users
Before you continue, make OMS or FreeMIDI settings as appropriate for your MIDI system.
For details on making these settings, refer to Readme-E.HTM located in the driver folder of the
included CD-ROM.
1.
From the Options menu, choose MIDI Devices.
2.
In the MIDI Devices dialog box that appears, make the following settings.
Mac OS 9
Mac OS X
3.
Click [OK] to close the dialog box.
74
fig.editor-midi.e
Input port
Output port
fig.editor-midi2.e
MIDI System:
Input port:
Output port:
fig.editor-midi3.e
Input port:
Output port:
EDIROL UR-80 2
EDIROL UR-80
Make the appropriate selection for
your system
UR-80 2
UR-80 1
UR-80 2
UR-80

Publicité

Table des Matières
loading

Table des Matières