Roland Edirol UR-80 Mode D'emploi page 20

Names of Things and What They Do
5.
Track faders............................................................................................................
You can assign MIDI messages to each of these eight faders. Typically, you will use the track faders
to control the track volume on your sequencer software.
6.
Master fader (MASTER) .........................................................................................
You can assign a MIDI message to this fader. The master fader controls the master volume on your
sequencer software. The final volume of the UR-80 itself is adjusted by its output volume knob.
fig.track-ctrl
Operating the Track Group select button does not switch the messages assigned to the Track
Control knobs, Track Status button, and Track Faders. The Track Group select button transmits
four different MIDI messages to your sequencer software to change the base track number on
your software.
20
7.Track Group select button (TRACK GROUP) ..........
You can assign four MIDI messages to the Track Group select button.
Each time you press the button, one of the four messages will be
7
transmitted.
The Track Group select button switches the group of tracks on your
sequencer software whose parameters will be controlled by the track
control knobs and track faders. This means that you can use the eight
knobs and faders to control the parameters of 32 tracks.
5
6
Assignable
Assignable
Assignable