Controller Settings; Midi Messages That You Can Assign To Controllers - Roland Edirol UR-80 Mode D'emploi

Controller settings

MIDI messages that you can assign to controllers

Message
NO ASSIGN
Channel Message
Note
Ch. Pressure
Poly.
Key Pressure
Control Change
Pitch Bend
Change
Program Change
Bank/Program
Change
RPN
NRPN
System Common/
Realtime
Free Message
Tempo
Explanation
Defeats the assignment. Operating this controller will not
transmit any message.
Assigns a Note message.
Assigns a Channel Pressure message.
Assigns a Polyphonic Key Pressure message.
Assigns a Control Change message.
Assigns a Pitch Bend message.
Assigns a Program Change message.
* The value of the program number has a range of 1-128.
Assigns a Bank Select message and Program Change message.
* The value of the Bank Select message is fixed.
* The value of the program number has a range of 1-128.
Assigns a Registered Parameter Number.
* The data entry LSB range is fixed at 0-127.
Assigns a Non-Registered Parameter Number.
* The data entry LSB range is fixed at 0-127.
Assigns a System Common or System Realtime message.
Assign any desired MIDI message of up to 24 bytes. (You can
assign more than one message.)
Assigns Tempo Control for transmitting MIDI Timing Clock
messages.
* Use UR-80 Editor to specify the output destination of the
timing clock messages. For details, refer to "System set-
tings (p. 82)".
UR-80 Editor
Assignable
parameters
MIDI Channel,
Note Number,
Velocity
MIDI Channel,
Mix Value,
Max Value
MIDI Channel,
Note Number,
Min Value,
Max Value
MIDI Channnel,
Control Number,
Min Value,
Max Value
MIDI Channnel,
Min Value,
Max Value
MIDI Channel,
Mix Value,
Max Value
MIDI Channnel,
Bank MSB,
Bank LSB,
Min Value,
Max Value,
MIDI Channnel,
RPN MSB,
RPN LSB,
MSB Min Value,
MSB Max Value,
Send LSB
MIDI Channnel,
NRPN MSB,
NRPN LSB,
MSB Min Value,
MSB Max Value,
Send LSB
Use the Status:
field to select the
desired message.
MIDI message of
up to 24 bytes,
Data Type, Min
Value, Max Value
Min Tempo,
Max Tempo
77