Audio Control Section - Roland Edirol UR-80 Mode D'emploi

Audio Control section

13
13.
Input sensitivity knob
This dual concentric knob adjusts the input level to input jacks 1 and 2 (INPUT 1/L, INPUT 2/R).
The UR-80 provides XLR type and phone type input jacks, and you can use either type as
appropriate for the equipment you want to connect. However, please be aware that the input
sensitivity of these jacks will differ.
The inner knob adjusts the INPUT 1/L input level, and the outer (ring) knob adjusts the
INPUT 2/R level.
Input levels
XLR type:
Phone type:
If you are connecting a low output level device such as a mic, we recommend that you use the XLR
type input jack.
14.
Peak indicators (PEAK)
These indicators show whether the sound being input to input jacks 1 and 2 (INPUT 1/L,
INPUT-2/R) is distorting. Adjust the input sensitivity knob so that the peak indicators do not light.
The peak indicators will light red at a level -6 dB below clipping.
15
15.
Output volume (VOLUME) knob
This adjusts the volume that is output from the headphone jack and the master output jacks.
* This does not affect the volume that is output from the digital output jacks.
14
-50– -10 dBu
-35– +4 dBu
Names of Things and What They Do
23